• Gasketed Plate & Frame Heat Exchanger

    .High Efficiency Heat Transfer  Performance
    .Reduced Fouling
    .Compact Size
    .Lower Cost
    .Easy to Clean and Inspect

    Read More
  • Shell & Tube Type Heat Exchanger

    . Less expensive as compared to Plate type coolers
    . Can be used in systems with higher operating temperatures and pressures
    . Pressure drop across a tube cooler is less

    Read More
  • Finned Tube Type Heat Exchanger

    . High-performance finned tube due to Fin to Tube Bonding
    . Resists high loads, both thermally and mechanically
    . Extremely dimensionally stable
    . Hardly any maintenance is required – maximum reliability

    Read More
  • Engine Testbed Charge Air Water Cooler

    . Reduced Fuel Consumption
    . Faster Engine Response
    . Lower Pressure Drop on Charge Air
    . More Compact Installation
    . More Stable Charge Air temperature
    . Maintenance Ease

    Read More
  • Lube Oil Cooler

    . Optional Nozzle Location
    . Removal of Bonnet without disturbing the Piping
    . No need to Empty the Shell Side for Inspection or Cleaning
    . Viton "0" Ring with its Special Retainer Ring makes inspection and cleaning of Tubes
    . Very easy, External Surfaces Sand Blasted And Enamel/Epoxy Painted

    Read More
  • Ammonia Condensor

    . Robust construction
    . Dimensional Accuracy
    . Corrosion Resistant
    . High performance

    Read More
  • ATE manufactures

    . Plate-and-bar type radiators
    . Welded tubes type radiators
    . Shell type radiators and
    . manifold type radiators

    Read More

 



WIRE FIN OIL COOLER




MODEL : ATE33-WFOC

ATE manufactures Wire-Fin Oil Coolers for cooling oil in various industrial application areas. Wire wound fin tube consists of a base tube with oval or near rectangular loops formed of wire which are wound helically over the tube with root soldering of foot of every loop to the tube.The loop of wire creates greater turbulence thereby increasing the heat transfer coefficient. Root soldering along the entire length eliminates almost all air gaps between the fin and the tube.For most applications, wire wound fin tubes make it possible to design a much compact heat exchanger coupled with lower pressure drop compared to conventional fin tubes. Our products are corrosion resistant, offer less maintenance and best efficiency and suitable for Cooling of :
• Hydraulic Oil
• Gear Oil
• Lube Oil

APPLICATION
a) Steam air heating or cooling applications. This is because the wire fins having a high airside coefficient are able to best utilize the very high coefficient of condensing steam.
b) Water Heaters - Coolers for the high heat transfer coefficiency.
c) Borewell Rig Compressor Oil Coolers.
d) Compact high strength but light weight heat exchangers to be used with equipment like Hydraulic Oil coolers, Lube Oil Coolers and assorted Oil and Water Coolers.

 




      

 



 

Locate Us



View Larger Map

Testimonials

 


With the intention to design

With the intention to design

With the intention to design